A while ago I had posted up a little bit about how I wanted to start making latex costumes. Well, I have gotten in all the materials and have been trying to practice and master my craft. Today I wanted to talk a little bit about how to actually glue seams on a latex accessory or costume to get the best results.
There are two different kinds of glues used when making latex outfits. A water based or solvent based adhesive. For a more stretchy or for gluing on details that won’t get too much stress I would go for the water based, also known as Liquid Latex. For a stronger, watertight bond I would go with the solvent based, which you can tell when you read a rubber cement that has a material called Hepatane in it. Both are good to use but it just depends on what you are using them for.
I use a solvent based adhesive called Best Test, which you can order online if you can’t find in your local art store, or if you are not in the states you can find a rubber cement called Bostik, which is very strong and durable.
The trick to gluing a seam is prep. Clean both sides of the seam with a solvent, like Heptane or Bestine, and let it dry. Then spread the glue on the seam so that it is evenly spread (sometimes using a credit card can be effective is making sure there are no spots that are not covered by the glue). Wait about 5 min for the glue to dry and get sticky and then slowly attach the two sides together. Once they are attached pinch along the seam to make sure it is evenly distributed or you can even use a wooden roller to get a cleaner look. Make sure you clean the seam with the solvent to get any extra glue and just wait for it to dry. It is best if you wait 24 hours to really let the glue adhere to itself.
Now you have a really strong seam that should last.
For more information on gluing or making latex costumes be sure to check out my blog, which is solely dedicated to me sharing my info I find. www.nerdylatex.com
Thanks for reading and happy diy-ing